Home Price List Tutorials Contact Us LogIn
 

SELECT REQUIRED TUTORIAL

This tutorial will guide you through the simple flash firmware process for a MAG254/322

The USB drive that is intended to perform STB SW update must comply with the next requirements

  1. FAT32 file system format.
  2. If there is more than one partition on the USB drive, it should use the first one.
  3. 1. Make sure that your USB drive meets the requirements.
  4. Download the imageupdate file from the specific URL.
  5. Connect the USB drive to PC and write the imageupdate file to the USB drive.
  • Note. It is recommended to write the file in a directory mag<model> in the root of the USB drive. For example, for MAG322 the directory name: mag322

This tutorial will guide you through the simple flash firmware process for a MAG420/424

This section explains how to manually update STB with commands of the System Settings menu in USB mode which intends that the update file ( imageupdate ) is located on the USB drive connected to STB

The USB drive that is intended to perform STB SW update must comply with the next requirements

  1. FAT32 file system format.
  2. If there is more than one partition on the USB drive, it should use the first one.
  3. 1. Make sure that your USB drive meets the requirements.
  4. Download the imageupdate file from the specific URL.
  5. Connect the USB drive to PC and write the imageupdate file to the USB drive.
  • Note. It is recommended to write the file in a directory mag<model> in the root of the USB drive. For example, for 420 the directory name: mag420
  • for 424 the directory name: mag424

  • Unplug power supply of STB
  • Connect the USB drive to any USB socket of STB
  • Press Service button, plug power supply and wait until mode 3 (LED red, lights steadily)
  • Release Sevice button - the Emergency startup has been selected
  • Press immediately Menu on the remote control and hold it until the System Recovery Utility menu appears on the TV screen
  1. Select Default Settings
  2. Upgrade Tools

List of service operations performed with System Recovery Utility includes

  • View / change the current TV system (also called Video output mode) and Graphic resolution to be set on the HDMI video output after software loaded (after loading the portal)
  • View / change current Boot mode of STB
  • View STB device and software info ( Device information ) with the option to save info on USB-drive
  • STB software update ( Upgrade Tools ⇒ Upgrade Software ). Used to install in STB only public versions of software
  • Installing operator logo in STB ( Upgrade Tools ⇒ Set Logotype ), which will be displayed on the TV screen when STB boots. The procedure of logo installing is described in the developer section - Logo of Bootloader
  • Installing / Reset Operator Key in STB ( Upgrade Tools ⇒ Set / Reset Operator's key ). This procedure can be used in STB for manual installing/uninstalling in STB the Operator Key to provide loading in STB OperatorImage
  • Reset STB to factory settings ( Default Settings)

Remote control widget allows controlling STB using mobile device Android and iOS based

The sequence for setting Remote control feature:

  1. Download and install application Remote control widget to a mobile device
  2. STB and the mobile device should be in the same network (address range)
  3. Make the necessary configurations on the STB Embedded portal: Main menu ⇒ Settings ⇒ System settings ⇒ Remote control :
  • Use remote control :
    • ON - the function is enabled
    • OFF - the function is disabled
  • Device name - a name that will be displayed on the mobile device when searching for and connecting to STB.
  • Password (numbers only) - password to be entered on the mobile device when connecting to STB.

4. Apply appropriate settings on the mobile device side.

Google App Store Remote Control - MAGic Remote

MAGic Remote
PEGI 3   Infomir Tools
PEGI 3 870 Install
 

 

This tutorial will guide you through the simple setup of StbEmuPro

DOWNLOAD AND INSTALL THE STB EMULATOR APP (IF YOU DO NOT ALREADY HAVE IT)

Download our latest version of StbEmuPro.1.2.7.3 (Download)

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Step 14

GET ACCESS TO THE BEST SERVERS ONLINE AT NetFlashTV.COM

 

How to install NetFlashTV (STB EMULATOR)on Amazon FireTV Stick via Downloader?

DOWNLOAD AND INSTALL THE NetFlashTV (STB EMULATOR) APP

Download our latest version of NetFlashTV.1.2.7.3 (Download)

This tutorial will cover the following phases:

-Enabling the installation of third party apps on Firestick

-Downloading the NetFlashTV (STB EMU) onto your Firestick and installation

Step 1: Before we proceed,please perform the following task

Click Settings ===> Click Device===>Click Developer Options ===> Click Apps from unknown sources to turn it on ===> Click turn on.

Go to Amazon app store , find downloader app and install it 

Step 2: First click on Home to bring up the address field then type the URL from which you can download the .apk file of NetFlashTV (STB EMU). We suggest to type the follwing URLs

Worldwide Package
http://netflashtv.com/StbEmuPro/NetFlashTV.1.2.7.3.apk


Step 3: After doing so, click Go and the file should start downloading.

Step 4: Installation might take a few seconds.


Great Support
 
Easy to Install
99.9% Up Time

Copyright © 2015 - netflashtv.com All Rights Reserved.